As an Amazon Associate I earn from qualifying purchases.1. Focket
Etc, WIN8, Interface Board,USB Interface Board CNC MACH3 Motion Control Card For Engraving Machine,Strong Anti-interference and Anti-reverse Support for Windows XP, WIN7
Focket - Support for windows xp, win7, win8, win10, support for 64-bit systems, support for laptops, support for tablets. Support various versions of MACH3 software, support for the latest version. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability.
The external wide voltage input, 12-24V, and anti-reverse function. All the input signal isolation by the light lotus, back to zero, can be accessed by emergency stop, limit, the knife, etc. To ensure computer security.
| Brand | Focket |
| Manufacturer | Focket |
| Height | 5 cm (1.97 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.15 kg (0.33 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | Focketkg0oq9fnxi |
2. LIUTT
USB Interface Board,USB Interface Board CNC MACH3 Motion Control Card For Engraving Machine
LIUTT - The external wide voltage input, 12-24V, and anti-reverse function. Support various versions of MACH3 software, support for the latest version. All the input signal isolation by the light lotus, back to zero, the knife, limit, etc.
Can be accessed by emergency stop, to ensure computer security. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability. Support for windows xp, win7, support for 64-bit systems, support for laptops, win10, win8, support for tablets.
| Brand | LIUTT |
| Manufacturer | LIUTT |
| Height | 5 cm (1.97 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.15 kg (0.33 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | LIUTTifgeb53gcn |
3. Esenlong
Esenlong USB Interface Board CNC MACH3 Motion Control Card For Engraving Machine Green+White
Esenlong - Support various versions of MACH3 software, support for the latest version. The external wide voltage input, 12-24V, and anti-reverse function. Support for windows xp, win7, win10, support for 64-bit systems, WIN8, support for laptops, support for tablets.
The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability. All the input signal isolation by the light lotus, can be accessed by emergency stop, the knife, etc. Back to zero, limit, to ensure computer security.
| Brand | Esenlong |
| Manufacturer | Esenlong |
| Weight | 0.23 kg (0.5 Pounds) |
| Part Number | 1713867-120144-22/AM92-0117 |
| Model | 1713867-120144-22/AM92-0117 |
4. Sharainn
Interface Card Driver Module, 12-24V USB Interface Board CNC MACH3 Motion Control Card for Laptops Tablets
Sharainn - Support for Windows XP, support for tablets. Security - the external wide voltage input, the knife, back to zero, and anti-reverse function. Usb interface board - the frequency converter interface avi+, can be connected with the relay module optocoupler, water control, Strong anti-interference ability.
Provide 4 output port 5v level, AVI- is isolated from the computer and the main control circuit, spray and so on. Compatibility - support various versions of mach3 software, WIN10, support for 64-bit systems, WIN7, support for laptops, win8, support for the latest version.
To provide pwm output 5V level, can be controlled by the PWM spindle control. 5v level - can be accessed by a total of yang or common cathode, the input level of 5V, with optocoupler input stepper motor driver.
All the input signal isolation by the light lotus, limit, etc. 12-24v, can be accessed by emergency stop, to ensure computer security. To provide electronic hand wheel interface. 0-10v analog voltage - all the way through the optocoupler isolated 0-10V analog voltage output, you can control the input voltage from 0-10V analog voltage converter to control the spindle speed.
| Brand | Sharainn |
| Manufacturer | Sharainn |
| Height | 5 cm (1.97 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.15 kg (0.33 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | Sharainnggm8nh5cpb |
5. Yanmis
12-24V USB Interface Board CNC MACH3 Motion Control Card for Laptops Tablets, Interface Card Driver Module
Yanmis - Security - the external wide voltage input, back to zero, the knife, can be accessed by emergency stop, 12-24V, and anti-reverse function.5v level - can be accessed by a total of yang or common cathode, the input level of 5V, with optocoupler input stepper motor driver.
0-10v analog voltage - all the way through the optocoupler isolated 0-10V analog voltage output, you can control the input voltage from 0-10V analog voltage converter to control the spindle speed. Compatibility - support various versions of mach3 software, win8, support for the latest version.
Provide 4 output port 5V level, water control, spray and so on. To provide electronic hand wheel interface. All the input signal isolation by the light lotus, etc.
Limit, to ensure computer security. Support for windows xp, support for 64-bit systems, WIN10, WIN7, support for laptops, support for tablets. To provide pwm output 5v level, can be connected with the relay module optocoupler, can be controlled by the PWM spindle control. Usb interface board - the frequency converter interface avi+, avi- is isolated from the computer and the main control circuit, Strong anti-interference ability.
| Brand | Yanmis |
| Manufacturer | Yanmis |
| Height | 5 cm (1.97 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.15 kg (0.33 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | Yanmisasic86xf4q |
6. Zunate
Motion Control Card, Aluminum Alloy Shell with Emergency Stopping Function Handwheel, MACH3 USB Interface Board, 3 Axle CNC Motion Controller Card
Zunate - Dual-core ultra-high-speed cpu single core with a maximum frequency of 204mhz, the processing power is extremely redundant. Single-chip, the system is more streamlined, and the stability of the multi-chip processing is much higher than the average. Has a maximum of 24 output port 8 channels, 32 input portwith 16 input, RS485 can be expanded, RS485 can expand 16.
Input and output, the actual spindle speed is displayed in real time on the Mach3 interface, to achieve ultra-reliability, it guarantees superior electro magnetic compatibilityimmunity.
With the speed measurement function, absolutely guarantee the safety of computer USB. Usb does not require drivers, all are plug and play, including the latest version. When the indicator is low, different from the optocoupler isolation of the general control card.
With 16 isolated input port, the port are wet and dry contacts, truly valuable isolation, the indicator is on and the debugging is simple and clear. All 16 input port have signal indication. And to ensure the 3k axle linkage 1000KHz pulse output frequency, 4 axle linkage 750KHz pulse output frequency. The dry contact method only needs to connect a physical switch to the ground line externally. Usb bus uses high-end chip magnetic coupling isolation, the input interface is simpler, and the wiring is simpler. Fit for all Windows versions.
| Brand | Zunate |
| Manufacturer | Zunate |
| Height | 15 cm (5.91 Inches) |
| Length | 26 cm (10.24 Inches) |
| Weight | 1.26 kg (2.78 Pounds) |
| Width | 18 cm (7.09 Inches) |
| Part Number | Zunateh3gmy6i5uq |
7. Oumefar
CNC Motion Control Card Board,Green 5 Axle MACH3 USB Interface Board + No Stop Handwheel
Oumefar - Support versions : support various versions of MACH3 software and support the latest version. Provide an electronic handwheel interface, the board prints all port names, at a glance. Wide external voltage input, and anti-reverse function.
For cnc machine tools, voltage output, complementary output, printing machinery and other 0 correction and signal segmentation. And provide 5-axle interface cable socket XH2.
54 for easy connection. Maximum output: maximum 100khz output per axle, input level is 5V, can be connected to common anode or common cathode, stepper with optocoupler input or servo motor driver pulse + direction.
Ports and interfaces：provide 4 output port 5v level, which can be connected with photocoupler relay module to control water cooling, spray and so on. Handwheel applications: open collector, long line drive. Anti-reverse function: pwm output 5v level is provided, 12-24V, which can be connected to the spindle governor controlled by PWM.
| Brand | Oumefar |
| Manufacturer | Oumefar |
| Height | 9 cm (3.54 Inches) |
| Length | 25 cm (9.84 Inches) |
| Weight | 0.87 kg (1.92 Pounds) |
| Width | 13 cm (5.12 Inches) |
| Part Number | Oumefarzs510gdofr276 |
8. Estink-
USB Interface Board Professional CNC MACH3 Motion Control Card MACH3 Interface Board For Engraving Machine, Interface Board
Estink- - To provide pwm output 5v level, can be controlled by the PWM spindle control. Support various versions of MACH3 software, support for the latest version. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability.
Support for windows xp, win8, support for 64-bit systems, WIN7, win10, support for laptops, support for tablets. All the input signal isolation by the light lotus, can be accessed by emergency stop, etc. The knife, limit, back to zero, to ensure computer security.
| Brand | Estink- |
| Manufacturer | Estink- |
| Height | 5 cm (1.97 Inches) |
| Length | 7 cm (2.76 Inches) |
| Weight | 0.15 kg (0.33 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | Estinkq2hr5pto43 |
9. Jeanoko
MACH3 CNC Motion Controller Card USB Motion Controller Card Stepper Motor Driver Board with Board Interface Support Various Versions
Jeanoko - Complete application functions: the cnc system can be connected to limit switches, forward and reverse rotation, probe switches, and can drive 4 relays to control the start of the spindle, emergency stop switches, zeroing equipment and other equipment, pumps and other equipment.
Need to input analog voltage 0-5v into digital quantity 1 -254. Digital input: the interface usb card has a 64-bit digital input, you can use MACH3 shortcuts or OEM codes, negative number of each axis, including general start, sign of each axis, emergency stop, etc.
Analog voltage input: mach3 controller card has 4 analog voltage inputs 0-5v, speed adjustment, which can be used for power supply, etc.
Usb connection mode: mach3 controller card adopts usb connection mode, fully support USB hot plugging, all Windows versions can be plug and play, no driver installation is required, and can be monitored at any time. Compatible with multiple versions: the cnc card controller has 4 encoder inputs and can support all Mach3 versions, including the latest version of Mach3 R3. 042. 040, and also supports all Windows versions.
| Brand | Jeanoko |
| Manufacturer | Jeanoko |
| Height | 4 cm (1.57 Inches) |
| Length | 22 cm (8.66 Inches) |
| Width | 12 cm (4.72 Inches) |
| Part Number | Jeanoko4gwb5i2qto |
Focket - Support for windows xp, win7, win8, win10, support for 64-bit systems, support for laptops, support for tablets. Support various versions of MACH3 software, support for the latest version. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability. The external wide voltage input, 12-24V, and anti-reverse function. All the input signal isolation by the light lotus, back to zero, can be accessed by emergency stop, limit, the knife, etc. To ensure computer security.
LIUTT - The external wide voltage input, 12-24V, and anti-reverse function. Support various versions of MACH3 software, support for the latest version. All the input signal isolation by the light lotus, back to zero, the knife, limit, etc. Can be accessed by emergency stop, to ensure computer security. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability. Support for windows xp, win7, support for 64-bit systems, support for laptops, win10, win8, support for tablets.
Esenlong - Support various versions of MACH3 software, support for the latest version. The external wide voltage input, 12-24V, and anti-reverse function. Support for windows xp, win7, win10, support for 64-bit systems, WIN8, support for laptops, support for tablets. The frequency converter interface AVI+, AVI- is isolated from the computer and the main control circuit, Strong anti-interference ability. All the input signal isolation by the light lotus, can be accessed by emergency stop, the knife, etc. Back to zero, limit, to ensure computer security.
Sharainn - Support for Windows XP, support for tablets. Security - the external wide voltage input, the knife, back to zero, and anti-reverse function. Usb interface board - the frequency converter interface avi+, can be connected with the relay module optocoupler, water control, Strong anti-interference ability.
Zunate - Dual-core ultra-high-speed cpu single core with a maximum frequency of 204mhz, the processing power is extremely redundant. Single-chip, the system is more streamlined, and the stability of the multi-chip processing is much higher than the average. Has a maximum of 24 output port 8 channels, 32 input portwith 16 input, RS485 can be expanded, RS485 can expand 16.
Oumefar - Support versions : support various versions of MACH3 software and support the latest version. Provide an electronic handwheel interface, the board prints all port names, at a glance. Wide external voltage input, and anti-reverse function.
Jeanoko - Complete application functions: the cnc system can be connected to limit switches, forward and reverse rotation, probe switches, and can drive 4 relays to control the start of the spindle, emergency stop switches, zeroing equipment and other equipment, pumps and other equipment.
