As an Amazon Associate I earn from qualifying purchases.
SMALLRIG - Anti-twist: it locks the camera via a 1/4"-20 screw on the bottom and features rubber pads on the base plate to prevent scratching and twisting. No-block: the battery compartment door of the L plate uses a rotating shaft structure design so that the battery can be quickly replaced by rotating and opening the battery door.
The grip features leather pads to support pinky and improve grip comfort. Built-in screwdrive: the l plate provides slots for the carry strap and comes with a flat-head screwdriver to secure the camera screw and store it on the bottom of the L bracket. Note: the quick-release base plate is NOT compatible with the Manfrotto MHXPRO-BHQ6 ball head. For sony a7 iii/a7r iii/a9: smallrig upgraded version l bracket 2122d provides a great experience for vertical and horizontal shooting.
It is a good choice as a grip extender for Sony A7 III/A7R III/A9. Slideable side plate: the side plate can be extended to the left by 22mm if more room is needed for tethering or cable release. Features multiple 1/4"-20 threaded holes on the side for accessory attachment like Cold Shoe Mount and Cable Clamp. Quick switch: both the base plate and side plate are for arca-swiss standard with centre marks, allowing you to quickly switch between vertical and horizontal shooting and for a better grip experience.
SMALLRIG - Slideable side platethe camera L palte can extend to the left by 20mm if you need more room for tethering or cable release. Quick switchboth the side plate and base plate are compatible with Arca, allowing a quick switch between horizontal and vertical orientation shooting.
Perfect designthe l-plate comes with 1/4"-20 accessory threads allowing mount of accessories, such as Cold Shoe Mount or SmallRig Cable Clamp 2259. Also a flat-head screwdriver is kept on the base plate for easy access. Anti-twistthe l bracket attaches to the camera via a 1/4"-20 screw, with anti-twist design and rubber cushion preventing wiggles or scratches. For a7iii/a7riii/a9smallrig l-bracket 2940 exclusively design for sony a7iiI/A7RIII/A9 cameras. It does not block buttons, LCD screen, ports, or battery compartment of the camera.
SMALLRIG - For sony a7 iv/a7 siii/a 1: smallrig l-bracket 3660 is designed for sony alpha 7 IV/Alpha 7 SIII/Alpha 1. Note: with this l bracket, the HDMI door and USB door cannot be opened simultaneously. This l bracket enables a quick switch between horizontal and vertical shots while enhancing the gripping experience.
If you are using a relatively small and round ARCA clamp, it may be difficult to align vertically to the optical center of the camera. Quick switch: the bottom of the base mount bracket integrates a Swiss plate for Arca that allows switching directly to tripod shooting and the quick-release plate pad for DJI RS 2/RSC 2 stabilizers. Comfortable grip: there is a spindle spanner at the battery door which fits the camera curve and leaves room for a little finger for a comfortable grip and embedded select genuine leather in the baseplate integrates into the camera body.
Anti-twist: mount the camera onto an l plate with an integrated 1/4"-20 screw and locating pin. Smallrig l-bracket 3660 features built-in silicone pad to prevent scratches and twisting. We recommend using larger ARCA clamps. To ensure the camera's lcd flip screen can be opened, we make a cut on the side plate. Extendable side plate: the side plate is extendable to allow attaching HDMI cables and adjusted back and forth to facilitate 180-degree opening and 120-degree rotation of the LCD screen of Alpha 7 IV/Alpha 7S III.
SMALLRIG - More accessories: secures to the bottom of the camera with 1/4 Screw to prevent twisting. Quick switch: a quick switch between horizontal and vertical orientation shooting, without flipping the tripod head on its side or move your shooting position.
Built-in an allen key and a flat head screwdriver, you are able to tighten or loosen the screws of L Bracket wherever you are. The side plate can be extended to left by 24mm if you need more room for tethering or cable release. For sony a7c: smallrig 3089 l bracket is designed for sony A7C. L plate is well adapted camera body and will not block any access to buttons, battery compartment.
Slideable side plate: customized side plate can be moved forward and back. Easy to install: both the base plate and side plate with for Arca-type compatible dovetails come with lens center mark, which enables the camera to mount in a vertical or horizontal position.
SMALLRIG - It locks the camera via a 1/4"-20 screw on the bottom and features rubber pads on the baseplate to prevent scratching and twisting. And also can be forwarded to allow the utilization of flip screen. Unique side platefeaturing a removable cold shoe on the top to support the microphone or LED light.
Built-in screwdrivera flat-head screwdriver and Allen Wrench are included to secure the camera screw and stores it on the bottom of the L bracket. Quick switchboth the baseplate and side plate are for Arca-Swiss standards with center marks. Allowing a quick switch between horizontal and vertical orientation shooting and for better grip experience. The bottom fits perfectly with the battery compartment and can be placed smoothly.
Multiple mounting pointsthe bottom of the L plate features multiple 1/4"-20 threaded holes for accessory attachment such as Mini tripod or Quick Release Plate. For a1/a7s iii/a7r iv/a9iismallrig l bracket 3207 is specially designed for sony a1/a7s iii/a7r iv/a9ii. The side plate can be extended to the left by 25mm if more room is needed for tethering or cable release.
WLPREOE - The surface is sandblasted and treated by anticathode oxidation which greatly improves the anti-corrosion. If your swiss-arca clamp is the different size, don’t worry, you can install the shorter plate on your quick release plate on the Swiss-Arca clamp with 1/4'' screws directly. Rubber pads are added on the bracket to protect the camera surface from scratch and abrasion.
Horizontal and vertical shooting: it has 2 standard slot 38mm/15inch at the both ends of bracket, which support horizontal and vertical shooting. Package contents: 1 x long plate, 1 x short plate, 2 x 1/4 standard screw, 1 x 1/4 screw locking claps, 1 x Wrench, 3 x Combiniton screw. The l-shape plate compatible with most of DSLR cameras with Arca-Swiss standard fit most of camera, video track slider, quick release plate and also gimbal stabilizer. The shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm.
Perfect solution for Instagram, DSLR. Anti-slip & anti-scratches: each side of the camera L bracket is equipped with an anti-slip screw to increase stability. Universal camera bracket: this l-shape quick plate with 6*1/4" screw hole and 4*3/8"screw hole. Comes with 1/4" thread screw hole on other end to connect tripod, camcorder, Gimbal, stabilizer, IGTV vertical video shooting. Body material: this’s made by aviation aluminum alloy casting with precision CNC machining, the lightweight strong body is durable without deformation.
CAMOLO - Highly applicable6 pieces of rubber pads are pasted on the longer plate to increase stability and protect the camera surface from scratch and abrasion. Universal plateequipped with a short arca-swiss standard screw-knob quick release plate and a long l-shaped quick release plate, this camera clamp is compatible with most of the dslr cameras with Arca-Swiss standard; Support camera model: Canon EOS 80D T6 5D mark i 6D 60D 7D 70D 77D D800 T6i 1300D Sony a7riii a7rii A7S a6000/6300/6500 Nikon D750 D850 D3400/3300/5600/5300 D7200 PANASONIC GH3/4/5, etc.
With 1/4' and 3/8' screws, this l bracket can be used on video tripod mount head such as Manfrotto and also gimbal stabilizer like DJI Zhiyun Smooth, Mirrorless Cameras; perfect solution for Instagram, IGTV vertical video shooting. Easy instalationthe shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm. Lifetime warrantywe assure to provide a lifetime warranty which make your purchase 100% risk-free.
Aviation aluminum alloymade out with aviation aluminum alloy with highly-precise CNC technique, resistant to corrosion and super durable, our plate is lightweight, each side of the 2-piece plates is equipped with an anti-slip screw which can work with the U-shaped grooves of the clamp and protect the camera from accident drops. If your swiss-arca clamp has a different size, don’t worry, you can install the shorter plate on your quick release plate on the Swiss-Arca clamp with 1/4'' screws directly.
SMALLRIG - It maintains open access to the camera's controls and features a variety of mounting options. Arri-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle 2165 or SmallRig Ball Head Magic Arm 2115. Multiple mounting pointsin addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage 2918 features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage.
Moreover, there are multiple 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom to add an optional quick release plate. The smallrig formfitting cage 2918 protects and offers accessory mounting for your Sony a7 III, a7R III, or a9 camera. Besides, rubber padding on the base also helps prevent twisting and scratching. Recommendationsyou can attach smallrig wooden side handle 2093 for hand-held shooting, and smallrig cable clamp 3104 to protect the HDMI cable and port.
A screwdriver is included to secure the screws, and it stores in the base of the cage. Perfect protectionthe cage 2918 incorporates an anti-twist design with an m2. 5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can't move around in the cage. Sweet designan integrated strap slot allows you to add an optional wrist or shoulder strap. Compatibilitylightweight design with only 167g.
SMALLRIG - Multiple mounting points: the cage features one integrated shoe mount, multiple 1/4"-20 threads and a 3/8"-16 locating hole for ARRI. Note:this cable clamp is not compatible with Sony Alpha 1. A magnetic flat-head screwdriver & Allen wrench is stored on the bottom of the cage to secure the mounting screw.
The cage also has a built-in naTO rail on the side, and it also features strap slots for a separately available neck or hand strap. The alpha 7 iv cage features built-in protective pads that prevent the camera from being scratched. The side grip features a silicone insert for better grip and more stable shooting. Handle features 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, built-in cold shoes for mounting microphones, LED lights, monitors, etc. Top handle & side handgrip: come with a top handle for low-angle shot and a side handle for increased stability.
The top handle feels comfortable and enables easy carrying at a low-angle shot. It is designed to reduce armload and increase stability during handheld shooting while offering a wide range of accessory mounts. Two-point locking: mount the camera onto the cage with an integrated 1/4"-20 screw, one for alpha 7 IV to prevent twisting. To use the side locking plate, and use the two side locking platesone for Sony Alpha7S III, please remove the split ring on the left side of the camera first. It is designed for sony alpha 7 IV and for Sony Alpha 7 S III.
SMALLRIG - Upgraded version: smallrig 2903b is an upgraded version monitor mount. Note: different tilt angle has different load capcaity, 30° tilt load capacity＜2. 3kg. Tension adjustable: the monitor mount can tilt 180 degree and and swivel 360 degree.
Wide compatibility: features 3/8'' locating screw for arri at the bottom to connect camera cage, microphone, 1/4"-20 threaded hole for magic arm or stabilizer. The swivel tension is adjusted by provided Allen Wrench. For the safety, 90° load capacity＜4. 2kg; 45° tilt load capacity＜2. 5kg, please do use the allen Wrench to re-tighten the 1/4'' knurled screw for further security. 1/4"-20 screw on the top support monitor, light, etc.
It is designed to support 5” and 7” camera monitors via screw mount for ARRI on top of camera cages or handles. Different with the old version using Allen Wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. Anti-twist design: the camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting.
1. SMALLRIG
New Version SMALLRIG A7RIII /A7III/ A9 Camera L Bracket for Sony A7RIII /A7III/ A9, Sliderable Adjustment L Plate, 2122D, L-Shape Quick Release Plate
The grip features leather pads to support pinky and improve grip comfort. Built-in screwdrive: the l plate provides slots for the carry strap and comes with a flat-head screwdriver to secure the camera screw and store it on the bottom of the L bracket. Note: the quick-release base plate is NOT compatible with the Manfrotto MHXPRO-BHQ6 ball head. For sony a7 iii/a7r iii/a9: smallrig upgraded version l bracket 2122d provides a great experience for vertical and horizontal shooting.
It is a good choice as a grip extender for Sony A7 III/A7R III/A9. Slideable side plate: the side plate can be extended to the left by 22mm if more room is needed for tethering or cable release. Features multiple 1/4"-20 threaded holes on the side for accessory attachment like Cold Shoe Mount and Cable Clamp. Quick switch: both the base plate and side plate are for arca-swiss standard with centre marks, allowing you to quickly switch between vertical and horizontal shooting and for a better grip experience.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 6.05 cm (2.38 Inches) |
| Length | 14.19 cm (5.59 Inches) |
| Weight | 0.17 kg (0.37 Pounds) |
| Width | 9.3 cm (3.66 Inches) |
| Part Number | 2122-CF |
| Model | 2122-CF |
| Warranty | Manufacturer warranty for 1-year from date of purchase. |
2. SMALLRIG
2940, SMALLRIG Camera L Bracket L Plate for Sony A7 III/A7R III/A9 Cameras
Perfect designthe l-plate comes with 1/4"-20 accessory threads allowing mount of accessories, such as Cold Shoe Mount or SmallRig Cable Clamp 2259. Also a flat-head screwdriver is kept on the base plate for easy access. Anti-twistthe l bracket attaches to the camera via a 1/4"-20 screw, with anti-twist design and rubber cushion preventing wiggles or scratches. For a7iii/a7riii/a9smallrig l-bracket 2940 exclusively design for sony a7iiI/A7RIII/A9 cameras. It does not block buttons, LCD screen, ports, or battery compartment of the camera.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 3.81 cm (1.5 Inches) |
| Length | 10.3 cm (4.06 Inches) |
| Weight | 0.1 kg (0.22 Pounds) |
| Width | 8.35 cm (3.29 Inches) |
| Part Number | 2940-CF |
| Model | 2940-CF |
3. SMALLRIG
Quick Release L Plate for Sony Alpha 7 IV/Alpha 7 SIII/Alpha 1, 3660, SMALLRIG A7 IV/A7S III/A1 L-Bracket for Arca-type
If you are using a relatively small and round ARCA clamp, it may be difficult to align vertically to the optical center of the camera. Quick switch: the bottom of the base mount bracket integrates a Swiss plate for Arca that allows switching directly to tripod shooting and the quick-release plate pad for DJI RS 2/RSC 2 stabilizers. Comfortable grip: there is a spindle spanner at the battery door which fits the camera curve and leaves room for a little finger for a comfortable grip and embedded select genuine leather in the baseplate integrates into the camera body.
Anti-twist: mount the camera onto an l plate with an integrated 1/4"-20 screw and locating pin. Smallrig l-bracket 3660 features built-in silicone pad to prevent scratches and twisting. We recommend using larger ARCA clamps. To ensure the camera's lcd flip screen can be opened, we make a cut on the side plate. Extendable side plate: the side plate is extendable to allow attaching HDMI cables and adjusted back and forth to facilitate 180-degree opening and 120-degree rotation of the LCD screen of Alpha 7 IV/Alpha 7S III.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 6.51 cm (2.56 Inches) |
| Length | 14.22 cm (5.6 Inches) |
| Weight | 0.15 kg (0.34 Pounds) |
| Width | 8.88 cm (3.5 Inches) |
| Part Number | 3660-CF |
| Model | 3660-CF |
4. SMALLRIG
SMALLRIG Camera L Bracket, L Shape Quick Release Plate for Sony A7C, 3089, L Plate for Arca-type
Built-in an allen key and a flat head screwdriver, you are able to tighten or loosen the screws of L Bracket wherever you are. The side plate can be extended to left by 24mm if you need more room for tethering or cable release. For sony a7c: smallrig 3089 l bracket is designed for sony A7C. L plate is well adapted camera body and will not block any access to buttons, battery compartment.
Slideable side plate: customized side plate can be moved forward and back. Easy to install: both the base plate and side plate with for Arca-type compatible dovetails come with lens center mark, which enables the camera to mount in a vertical or horizontal position.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 8.45 cm (3.33 Inches) |
| Length | 13.52 cm (5.32 Inches) |
| Weight | 0.13 kg (0.3 Pounds) |
| Width | 5.43 cm (2.14 Inches) |
| Part Number | 3089-CF |
| Model | 3089-CF |
5. SMALLRIG
3207, SMALLRIG Camera L Bracket for Arca-type L Plate for Sony A1/A7S III/A7R IV/A9 II
Built-in screwdrivera flat-head screwdriver and Allen Wrench are included to secure the camera screw and stores it on the bottom of the L bracket. Quick switchboth the baseplate and side plate are for Arca-Swiss standards with center marks. Allowing a quick switch between horizontal and vertical orientation shooting and for better grip experience. The bottom fits perfectly with the battery compartment and can be placed smoothly.
Multiple mounting pointsthe bottom of the L plate features multiple 1/4"-20 threaded holes for accessory attachment such as Mini tripod or Quick Release Plate. For a1/a7s iii/a7r iv/a9iismallrig l bracket 3207 is specially designed for sony a1/a7s iii/a7r iv/a9ii. The side plate can be extended to the left by 25mm if more room is needed for tethering or cable release.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 9.56 cm (3.76 Inches) |
| Length | 13.9 cm (5.47 Inches) |
| Weight | 0.27 kg (0.6 Pounds) |
| Width | 6.46 cm (2.54 Inches) |
| Part Number | 3207-CF |
| Model | 3207-CF |
6. WLPREOE
WLPREOE DSLR Camera L-Bracket Vertical Horizontal Switching Tripod Head Quick Release Plate Arca Swiss Compatible with Digital DSLR Camera Stabilizer Tripod Monopod Canon Nikon Sony
Horizontal and vertical shooting: it has 2 standard slot 38mm/15inch at the both ends of bracket, which support horizontal and vertical shooting. Package contents: 1 x long plate, 1 x short plate, 2 x 1/4 standard screw, 1 x 1/4 screw locking claps, 1 x Wrench, 3 x Combiniton screw. The l-shape plate compatible with most of DSLR cameras with Arca-Swiss standard fit most of camera, video track slider, quick release plate and also gimbal stabilizer. The shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm.
Perfect solution for Instagram, DSLR. Anti-slip & anti-scratches: each side of the camera L bracket is equipped with an anti-slip screw to increase stability. Universal camera bracket: this l-shape quick plate with 6*1/4" screw hole and 4*3/8"screw hole. Comes with 1/4" thread screw hole on other end to connect tripod, camcorder, Gimbal, stabilizer, IGTV vertical video shooting. Body material: this’s made by aviation aluminum alloy casting with precision CNC machining, the lightweight strong body is durable without deformation.
| Brand | WLPREOE |
| Manufacturer | WLPREOE |
| Part Number | wl5052-uk |
| Warranty | 2 year manufacturer |
7. CAMOLO
CAMOLO Arca Swiss L Bracket, DSLR Camera Mount Quick Release Plate Vertical Video Shooting Universal L Bracket with 1/4“” Screw Arca Swiss for Manfrotto DJI Zhiyun Canon Nikon Sony Mirrorless Camera
With 1/4' and 3/8' screws, this l bracket can be used on video tripod mount head such as Manfrotto and also gimbal stabilizer like DJI Zhiyun Smooth, Mirrorless Cameras; perfect solution for Instagram, IGTV vertical video shooting. Easy instalationthe shorter plate is installed on the bottom and with the standard slot of Swiss-Arca 38-39mm. Lifetime warrantywe assure to provide a lifetime warranty which make your purchase 100% risk-free.
Aviation aluminum alloymade out with aviation aluminum alloy with highly-precise CNC technique, resistant to corrosion and super durable, our plate is lightweight, each side of the 2-piece plates is equipped with an anti-slip screw which can work with the U-shaped grooves of the clamp and protect the camera from accident drops. If your swiss-arca clamp has a different size, don’t worry, you can install the shorter plate on your quick release plate on the Swiss-Arca clamp with 1/4'' screws directly.
| Brand | CAMOLO |
| Manufacturer | MUSHAN |
| Height | 2.5 cm (0.98 Inches) |
| Length | 13.5 cm (5.31 Inches) |
| Width | 5.5 cm (2.17 Inches) |
| Part Number | MSDE-C01865 |
8. SMALLRIG
SMALLRIG Light Weight Camera Cage for Sony A7 III / A7R III / A9 Camera, 2918
Moreover, there are multiple 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom to add an optional quick release plate. The smallrig formfitting cage 2918 protects and offers accessory mounting for your Sony a7 III, a7R III, or a9 camera. Besides, rubber padding on the base also helps prevent twisting and scratching. Recommendationsyou can attach smallrig wooden side handle 2093 for hand-held shooting, and smallrig cable clamp 3104 to protect the HDMI cable and port.
A screwdriver is included to secure the screws, and it stores in the base of the cage. Perfect protectionthe cage 2918 incorporates an anti-twist design with an m2. 5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can't move around in the cage. Sweet designan integrated strap slot allows you to add an optional wrist or shoulder strap. Compatibilitylightweight design with only 167g.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 5.85 cm (2.3 Inches) |
| Length | 14.35 cm (5.65 Inches) |
| Weight | 0.17 kg (0.37 Pounds) |
| Width | 10.6 cm (4.17 Inches) |
| Part Number | 2918-CF |
| Model | 2918-CF |
9. SMALLRIG
Side Handgrip and HDMI Cable Clamp, SMALLRIG A7 IV / A7S III Cage with Top Handle, Advanced Kit for Sony Alpha 7 IV/Alpha 7 S III -3669
The cage also has a built-in naTO rail on the side, and it also features strap slots for a separately available neck or hand strap. The alpha 7 iv cage features built-in protective pads that prevent the camera from being scratched. The side grip features a silicone insert for better grip and more stable shooting. Handle features 1/4"-20 threaded holes, 3/8"-16 locating holes for ARRI, built-in cold shoes for mounting microphones, LED lights, monitors, etc. Top handle & side handgrip: come with a top handle for low-angle shot and a side handle for increased stability.
The top handle feels comfortable and enables easy carrying at a low-angle shot. It is designed to reduce armload and increase stability during handheld shooting while offering a wide range of accessory mounts. Two-point locking: mount the camera onto the cage with an integrated 1/4"-20 screw, one for alpha 7 IV to prevent twisting. To use the side locking plate, and use the two side locking platesone for Sony Alpha7S III, please remove the split ring on the left side of the camera first. It is designed for sony alpha 7 IV and for Sony Alpha 7 S III.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 13.5 cm (5.31 Inches) |
| Length | 21.15 cm (8.33 Inches) |
| Weight | 0.58 kg (1.28 Pounds) |
| Width | 17.65 cm (6.95 Inches) |
| Part Number | 3669-CF |
| Model | 3669-CF |
| Warranty | Manufacturer warranty for 1-year from date of purchase. |
10. SMALLRIG
2903B, New Version SMALLRIG Camera Monitor Mount with 3/8'' Screw for ARRI-Style, 360° Swivel and 180° Tilt Adjustable Monitor Holder with Thumbscrew to Adjust the Tension, with Anti-twist Design
Wide compatibility: features 3/8'' locating screw for arri at the bottom to connect camera cage, microphone, 1/4"-20 threaded hole for magic arm or stabilizer. The swivel tension is adjusted by provided Allen Wrench. For the safety, 90° load capacity＜4. 2kg; 45° tilt load capacity＜2. 5kg, please do use the allen Wrench to re-tighten the 1/4'' knurled screw for further security. 1/4"-20 screw on the top support monitor, light, etc.
It is designed to support 5” and 7” camera monitors via screw mount for ARRI on top of camera cages or handles. Different with the old version using Allen Wrench, the tilt tension of this upgraded monitor mount is quickly adjusted via a thumbscrew. Anti-twist design: the camera monitor holder bulid in bouncy locating pins on the top to futher secure Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 3.8 cm (1.5 Inches) |
| Length | 3.9 cm (1.54 Inches) |
| Weight | 0.08 kg (0.17 Pounds) |
| Width | 5.26 cm (2.07 Inches) |
| Part Number | 2903-CF |
| Model | 2903-CF |
| Warranty | Manufacturer warranty for 1-year from date of purchase. |
