As an Amazon Associate I earn from qualifying purchases.
SMALLRIG a7sii Cage Kit with Top Handle and HDMI Clamp for Sony a7ii a7rii a7sii-2014SMALLRIG
- The nato mounting rail on the left side could be mounted with NATO handle or EVF bracket, such as SmallRig NATO Handle 1955, EVF Mount 1594, etc. The integrated rosette for arri standard on right side of the cage allows for any rosette compatible accessory attachment like SmallRig Wooden Handle Grip 1941.
Non-twist design prevents camera from twiting during shooting. Plenty of 1/4" - 20 and 3/8" -16 mounting holes for accessories. It also comes with eyelets for shoulder straps and wrist straps to prevent the camera rigs from accidental dropping during shooting.
The cage fits camera perfectly, blocking no access to the ports and buttons. It is designed only for sony a7 iI/ A7R II/ A7S II.
The built-in cold shoe on the top could be mounted with flash lights, 1897, microphone or magic arm for monitor. Smallrig a7 ii/ a7r ii/ a7s ii accessory kit 2014 is made up of the cage, top handle and hdmi cable clamp, and it totally meets the demands of the clients while shooting in handheld motion. Machined from a solid block of aluminum, it has a more comprehensive performance than the previous version.
|Height||10.75 cm (4.23 Inches)|
|Length||14.5 cm (5.71 Inches)|
|Weight||0.53 kg (1.17 Pounds)|
|Width||6.4 cm (2.52 Inches)|
1679, SMALLRIG HDMI Cable Lock for SMALLRIG A7RIII A7III A7RII A7SII A7II CagesSMALLRIG
- Wingnut screw: the wingnut screw of the cable clamp is made to help you tighten the HDMI plug and prevent it from accidentally dropping. It could be adjusted by stretching if the wingnut block your device.
Note: please confirm the part number of your SmallRig cage and read the compatibility of this cable clamp before purchasing. Extra m5 threads: this hdmi cable clamp features two M5 threaded holes for attaching screws for locking USB Cable.
Installation: secure tightly on side of the cage with two 1/4"-20 screws, unsmooth surface on the cable clamp opening could increase the friction to keep the cable from falling off. Compatibility: hdmi cable clamp 1679 is specially developed for the smallrig cages for sony a7ii and a7iii series cameras. It is compatible with cage 2087/2096/2103for a7riii /a7iii, and cage 2014/2098/1982/1894for Sony A7II/A7RII/A7SII.
|Height||1.1 cm (0.43 Inches)|
|Length||5 cm (1.97 Inches)|
|Weight||0.04 kg (0.09 Pounds)|
|Width||4.8 cm (1.89 Inches)|
3021, Male Micro-HDMI Type D to Female HDMI Type A Converter, for Sony A7R IV / A7RIII/ A7III/ A7II/ A7RII, for Fujifilm X-T2/ X-T3, SMALLRIG 4K HDMI Cable Adapter 4K@60Hz, Cable Length 8 cm/3 inchSMALLRIG
- 2 x 1/4"-20 threads on female endthe female end features two 1/4"-20 threads for attaching to a cage, or rig, bracket, and the threads measure 0.35inch apart from center-to-center. Two screws are included to mount the adapter onto your rig.
Note: please make sure the HDMI port on your camera is a Micro HDMI type. 4k@60hz hdmi adapterit supports resolution up to 4K@60Hz and will be backward compatible. Flexible pvc hdmi cablethis flexible ultra-slim pvc hdmi cable's total length is 141.
1mm/5. 6 inch, the cable length is 80mm/3 inc. Suitable for most cameras to the lossless transmission for high-definition pictures and videos. Aslo fits camera cages or l brackets with no less than two 1/4"-20 holes 9mm from center to center on the left side, 2238, A7II, A7RII, A7RIII, etc.
Mounting on a camera cage or rig for easy camera data transmission. Wide compatibilityit fits for sony a7r iv, like smallrig ccs2416, 2229, or for fujifilm x-t2, a7iii, 2228, x-t3. Male type d to female type a 4k hdmi adaptersmallrig ultra slim 4k hdmi cable 3021 is a high-quality HDMI converter, it is Micro HDMI Male to HDMI Female port.
|Height||1.18 cm (0.46 Inches)|
|Length||14.11 cm (5.56 Inches)|
|Weight||0.03 kg (0.07 Pounds)|
|Width||3.32 cm (1.31 Inches)|
SMALLRIG HDMI Cable Clamp Compatible with Selected SMALLRIG Camera Cages, 3637SMALLRIG
- It prevents the cable from loosening and help reduce cable damage. The unsmooth dentate surface on the clamp opening could increase the friction to clamp the cable. Easy adjustment: you can adjust the tightness by twisting the thumbscrew.
Firm installation: it attaches to the side of SmallRig cages with two 1/4"-20 screws. Full protection: this clamp firmly hold the HDMI cable in place and ensures stable signal transmission.
Light & portable: it weighs only 30g, lightweight, compact, and easy to store in your camera bag. The caliber can open to 25mm, compatible with HDMI cables of various sizes. Compatibility: the hdmi cable clamp lock 3637 is specially developed for sonya7r iii, a7 ii series cage: 2087c/2096d/2103C/CCS2629/2098/CCS2416/2014; for Panasonic S1, s5 series cage: 2983, a7r iv, a7 iii, CCP2345; for Fujifilm X-S10 cage 3087.
|Height||1.15 cm (0.45 Inches)|
|Length||4.75 cm (1.87 Inches)|
|Weight||0.03 kg (0.07 Pounds)|
|Width||4.5 cm (1.77 Inches)|
|Warranty||Manufacturer warranty for 1-year form date of purchase.|
Tilta Full Camera Cage Compatible with Sony A7/A9/A7 II/A7 III/A7S/A7S II/A7R/A7R II/a7R III Video Filmmaking Kit,with Camera Cage Top Handle,Quick Release Plate,Hand Strap TA-T17-A-GTILTA
- Quick release top handle provides more flexibility when operating and handling. Mounting points include cold shoe, 1/4"-20 and 3/8"-16 threads. Compatible with sony a7ii/a7iii/a7s/a7s ii/a7rii/a7RIII/A9 cameras, minimizes wear and supports accessories.
Compatible with type iiI baseplates and quick release plates via 1/4"-20 threads. Durable made of premium aluminum-alloy and stainless steel.
|Height||22.86 cm (9 Inches)|
|Length||15.24 cm (6 Inches)|
|Weight||0.59 kg (1.3 Pounds)|
|Width||8.89 cm (3.5 Inches)|
SMALLRIG Baseplate with Quick Release Plate, Rod Height Adjustable Camera Tripod Mounting Plate for Universal 15mm LWS, 2092SMALLRIG
- Universality smallrig baseplate 2092 is designed for most mirrorless and dslr cameras. Compatible with sony a6000/a6300/ a6500/a7/a7ii/a9/a7riii, for panasonic gh3/gh4/gh5/G80 GX85/ G85/G7, for Fujifilm X-T2, for BMPCC.
Height adjustable the base plate’s height is adjustable via a wingnut, and thus it enables 85mm rod height. Support 15 mm lws system attach a 15mm rod 1053 for follow focus, matte box and Long Lens Support with Dual 15mm Rod Clamp 1087 based on your needs.
The height from QR plate to rod center ranges from 33. 6mm to 57. 6mm. Mounting points equipped with 1/4'' and 3/8'' threaded holes at the bottom to attach QR plates and then tripod. Quick switch the base plate comes with qr plate for arca standard, It locks the QR plate via a locking lever for quick release and attachment, so it is very easy to switch to handheld shooting.
|Height||5.7 cm (2.24 Inches)|
|Length||10.8 cm (4.25 Inches)|
|Width||7.2 cm (2.83 Inches)|
|Warranty||Manufacturer warranty for 2 years from date of purchase.|
For SmallRig Control Handle 3322/3323/3324, 3407, SMALLRIG Multi-Camera Spring Control Cable Type C to Multi for Sony Multi-Terminal Camera A7II/A7III/A6000/A6500/RX100III/RX100IVSMALLRIG
- Perfect combination smallrig multi-camera spring cable is designed for SmallRig control handle 3322/ 3323/ 3324. Recyclable materials made of tpe material, soft texture, smooth and non-greasy, resistant to dirt and dust. Multiple shooting possibilities smallrig 3407 can be connected to the handle and the camera stably through the Type C to MULTI interface, and can realize various shootings on the shoulder, tripod and handheld.
The user can stably and conveniently control the start and stop of camera rec recording.
Easy to recycle and effective energy saving, reducing environmental pollution. The spring cable is not easy to break, you will no longer change the camera cable repeatedly! .
Since then, longer life smallrig 3407 adopts spring design to expand and contract freely, and its total length can reach 800mm. Camera compatibility smallrig 3407 is widely suitable for sony a7/a7r/a7s/a7ii/a7rii/a7sii/a7siii/fx3/ a7iii/a7riii/fx3/a7r iv/a9/a9 ii/a5100/a6000/a6100/a6300/a6400/a6500/a6600/RX100 III/RX100IV/RX100V/ RX100 VI/RX100 VII. Spring design, is very durable and has a longer service life.
|Height||20 cm (7.87 Inches)|
|Length||1.3 cm (0.51 Inches)|
|Weight||0.02 kg (0.04 Pounds)|
|Width||1.3 cm (0.51 Inches)|
SMALLRIG Rosette Side Handle with Record Start/Stop Remote Trigger for Multiple Selected Cameras- 3324SMALLRIG
- Dedicate design: the wooden handle is ergonomic design, it is comfortable to hold in the hand. The all-in-one wooden handle can improve the grip experience a lot. 360 degree rotatable: with an rosette for arri standard m6, 31. 8mm in diameter, it can be adjusted 360 degrees, easy to change position during shooting.
Compatibility: the rosette handle is compatible with multiple selected cameras, for panasonic gh5/5s/g9/g95/s5/s1/s1r/s1/bgh1, such as for Sony A7/A7II/A7III/A6000/RX100 Series, for fujifilm x-T3/X-T4, and for Z CAM E2/M4/S6.
With an ergonomic design, the handle features a silicone gel record button on top where the thumb rests. Please check your model before placing an order. Start/stop recording: smallrig rosette side handle 3324 is designed to provide convenient record start/stop control for a stable and comfortable shooting experience.
If you want a top nATO handle, not to control taking pictures or focusing. 2. The handle can only be used to control the recording, please search for "smallrig 3323". Note: 1. Note: you need to purchase a smallrig rosette Mount 2804 separately to connect this wooden handle to a cage without a rosette mount. If you prefer to purchase a threaded side handle, please search for "SMALLRIG 3322".
|Height||7 cm (2.76 Inches)|
|Length||9.9 cm (3.9 Inches)|
|Weight||0.24 kg (0.53 Pounds)|
|Width||9.9 cm (3.9 Inches)|
SMALLRIG a6300 Cage for Sony a6300 / a6000-1661SMALLRIG
- Rubber cushionthe a6300 / a6000 cage features rubber cushions on the bottom, which increases friction to prevent camera from twisting and scratching. Related rigsthe a6300 / a6000 cage equipped with two m4 threaded holes on the front bottom, which enables you to mount metabones lens adapter support 1787, the front right top side comes with a 1/4 threaded hole for 15mm Micro Rod with 1/4'' thread 915.
With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls.
Note: the smallrig 1822 and smallrig 1970 are sold separately. Rich extension the cage includes 1/4" threaded holes for attachment option, such as attach a hdmi cable clamp smallrIG 1822 to protect HDMI port and attach a wooden handgrip on the right SMALLRIG 1970 For a6300/a6000smallrig camera cage 1661 is designed for sony a6300 / a6000 to provide protection.
Cold shoe adapterthe a6300 / a6000 cage features a built-in cold shoe for attaching microphone, articulating arm or other light accessories.
|Height||4.9 cm (1.93 Inches)|
|Length||13.7 cm (5.39 Inches)|
|Weight||0.16 kg (0.35 Pounds)|
|Width||8.45 cm (3.33 Inches)|
3322, SMALLRIG NATO Top Handle with Record Start/Stop Remote Trigger for Sony/for Panasonic/for FUJIFILM/for Z CAM CamerasSMALLRIG
- Compatibility the handle is compatible with multiple selected cameras, for panasonic gh5/5s/g9/g95/S5/S1/S1R/S1/BGH1, for FUJIFILM X-T3/X-T4, such as for sony a7/a7ii/a7iii/a6000 series, and for Z CAM E2/M4/S6. For example, the front cold shoe mount can work with Monitor Mount 2346.
Multiple mounting points the handle comes with multiple 1/4"-20, 3/8"-16 locating holes for arri standard, 3/8"-16 threaded holes, and cold shoes for mounting accessories. Note 1. Not include nato rail. The handle can only be used to control the recording, not to control taking pictures or focusing.
2. Different cameras correspond to different control cables. The front end comes with an 3/8"-16 locating hole for ARRI standard for Monitor Mount 2348. If you need an extra nato rail, please search for NATO rail 1409 or BUN2468 to purchase it separately.
Only to start/stop recording smallrig nato top handle 3322 is designed to provide convenient record start/stop control for a stable and comfortable shooting experience. With an ergonomic design, the handle features a silicone gel record button on top where the thumb rests. Quick switch the handle can quickly secure to a cage with integrated NATO rail or work with NATO Rail BUN2468 to increase compatibility. Please check your model before placing an order.
|Height||7.3 cm (2.87 Inches)|
|Length||13.9 cm (5.47 Inches)|
|Weight||0.21 kg (0.47 Pounds)|
|Width||2.74 cm (1.08 Inches)|