As an Amazon Associate I earn from qualifying purchases.
YOSH - Upgraded air vent clip adjustable width turn right or left of vent clip fits different horizontal air vents. Stable & safe with double protective shelf clamp and soft rubbers, even driving on roads with potholes, you can change the orientation of the holder with just one hand.
Wide compatibility yosh air vent car phone mount is compatible with phones up to 6. 8 inches such as iphone 15 14 13 12 11 pro max x xr 8 7 plus samsung a71 a70 s20 s20+ s20 ultra note20 Ultra Note20 Huawei Mate40 pro+ Mate40 pro Mate40 P40 Pro P40 Pro+. Unimpeded charging the gap at the bottom of the holder allows you to connect the mobile phone to the charging line. It benefits from upgraded silicone pad on the vent clip, which effectively protect the car air vents better than others.
Without removing the mobile phone, you can feel free to charge the mobile phone. Just place your device in the holder and push two arms to clamp it tightly, and press the button in the back to release it to remove the phone. Easy installation & removement the rotating ball design offers 360°rotation and ensures that you can adjust the holder to get the best viewing angle. Yosh air vent mobile phone holder can prevent phones from falling off or shaking, speed bumps and bumpy roads.
yola pro - All-round protectionthere are sponge pads on the surface, side arms and bottom feet of your dashboard/windshield phone holder, which will dampen vibration from road shock, and protect your device from falling and scratching against the mount. Prevent from blocking your view while driving. 2023 updated extendable longer arm telescopic arm of this car phone mount can extend from 11.
2023 upgraded industrial-strength suction cuppaired with industry-leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield/dashboard. This cell phone holder for car attaches firmly to the vehicle windshield and stays mounted in hot or cold. This car phone holder is washable and reusable. Note:we do not recommend to apply the dashboard car phone mount on leather, wall or filmed glass surfaces as the suction cup. For better suction, any rough or curved surfaces will weaken the suction;②allow the car phone holder mount to sit on the surface for 24 hours after installation;③Don't expose this cell phone holder for car to direct sunlight for a long time, seller suggestions①always install the cell phone holder for car on a smooth/flat/clean surface, low temperatures under10 degrees also will affect the suction④Remove the dust film from the bottom of the bracket before installing the car phone holder mount.2
2023 upgraded multiple usages car phone holderthis car phone mount with washable and reusable suction cup, windshield mount or desk mount, can be mounted here and there as a dashboard mount, releasing your hand from holding the phone, caring for your driving safety and making your life more convenient. Silicone padded clamp: in order to better protect the mobile phone and avoid the direct friction between the mobile phone and the bracket, we use silica gel pad as the connection. Silicone padded clamp causes no scratching to your precious phone.
Pnitri - Enhanced protective car phone mount: different from other products on the market, our product securely grips the phone on smooth road, speed bumps even rugged terrains, it will automatically stop applying pressure to the air vent. The ball joint structure allows you to choose your desired angles, catering to different heights and driving habits.
The inner parts of the clamping arms is also equipped with silicone pads to avoid scratches. Suitable for vertical and horizontal air vents. Personalized angles: the phone mount offers a smooth 360° rotation, enabling you to effortlessly switch between horizontal and vertical modes. Multiple upgraded features: the contact surface of the phone mount is covered by soft grooved silicone, allowing for more air flow and Reduce the possibility of slipping the phone. Clamping arm adjustment width. Car owners with circular air vents are advised to carefully observe and make a decision accordingly.
It fits most cars, suvs, and taxis, trucks, a perfect assistant for Uber and Lyft drivers. Triple support: in addition to its high-intensity metal hook, Pnitri car mount for phone is equipped with 2 supporting legs and 2 Snap-in slots, it can be rotated to various angles, ensuring stability and making no noise while protecting your car accessories. Pc+abs material with excellent heat resistance makes it suitable in regions with temperatures from -20°C to 70°C.
Arteck - Easy installation: using the mount is extremely convenient because of its human oriented design. Infinite angles: 360 degree rotation ball and adjustment knobs provide vertical and horizontal viewing angles.
Sturdy design: the sturdiness of this mount comes from its combination of premium quality rubber reinforced with extra strong durable plastic. Universal compatibility: the mount can be used with a variety of smartphones, x, 8, 12, 12 pro, 13, xr, 5, xs max, 14 pro, 8 plus, 14, Samsung S Series, including iPhone 15, 6, 11 pro max, 15 Pro, 11, 7, 13 mini, SE, 11 pro, 13 pro, xs, Note and all other smart phones and GPS navigations.
Multi mount locations: this multifunctional smartphone mount can be mounted on a variety of locations and surfaces because the sticky gel pad sticks securely to most surfaces, yet still easy to remove. The mount is generally lightweight and compact making it extremely handy and easily stored. The combination of these two materials gives this mount the much needed strength.
LISEN - It completely solves the common problems of cell phones popping up, shaking, and falling off. The unique hook will catch and hook the car's vent blades and attach the vent clip to three vent blades to form a "Triangular Structure" and achieve an absolute fixation. Never fall off/break, we designed the car phone holder air vent with the combination of "DOUBLE-LAYER METAL HOOK", build-in metal vent hook: based on feedback from over 1 million customers, as well as solving the problem of the plastic hook which is easily broken, and naked metal hook easy to scratch the Vent.
So it's compatible with 99% Horizontal & Vertical vents. We continue to embed sustainability ever deeper in the way we do business – in our own operations and beyond, together with our suppliers. We aim at producing high quality and usefull phone mount for car for our customers, Lisen operates sustainably, creating wonderful using experience to everyone who likes our car phone holder mount.
Perfect for all horizontal & vertical vents: the 3rd generation build-in metal hook clip of this car phone mount is 50% longer than the ordinary one, and the support ring is rotatable, you can adjust the hook via the wheel knob to a suitable length and rotate the support ring to optimal angle to fit your Vent layout. We will always stand by your side. Sturdy hold all phones and thick case super wide adjustable arms design and the deepest 1. 09-inch clasp length enable phone holder for car air vent to fit for all 4. 0-7.
UGREEN - Non-blocking structure: the air vent car phone Holder is very small in size, with no blocking views for safe driving. Enhanced stability: the upgraded sturdy clip of the Car Vent Phone Holder offers a stable solid grip to the phone holder; The 3-point structure ensures the strong lock of the phone, effectively preventing the phone from falling off.
Recommended to use with a thin phone case）. Simply put a phone into the holder, lock your phone automatically and grip it firmly, even on humps or bumpy roads. Just clip this car phone mount onto the air vent and slip your phone into its gravity clamp. The reserved charging port won't affect charging the phone while driving. One-handed operation: ugreen car phone cradle for air vent enables you to put down or pick up your phone simply with one hand.
Auto-clamp design: the gravity car vent phone mount features an auto-clamp gravity cradle to hold the phone in place. Universal compatibility: the mobile phone vent cradle fits 4. 7-7. 2 inches phones with a thin protective case, compatible with iphone 15 pro max/15 pro/15/15 plus/iphone 14 pro max/14 pro/14/13/13pro max/12 pro max / mi 11/10/Redmi Note 10 Pro / Pixel 6 Pro/5/4 / Huawei P50 Pro/P40/P30/P20 / Galaxy S23/S22/S21 Ultra/S21/S20 FE/S20+/S10 Lite/S10e / etc.
VANMASS - Comfortable experience anywhere. 3️⃣optimizing 1 engaged gear for perfect 2-side control; reduces the probability of one side clip arm getting stuck to 001%. 4️⃣the integrated feet can always hold the phone, with zero fracture; the 1. 6x wide bottom foot, No block of the charging port. Military-grade configuration & patent testthis brightest star of vanmass has sold 9, compatibility, 000+ kinds of material selection, and military-grade drop test certification No.
Gzmr220601855501 rigorously-tested stability, and 20, security, 500, 500+ suction cup upgrade designs, we created this star work for 3 years, 000 miles of road tests, 000+ units with lots of amazing responses and obtained RoHS safety certification, EU patent NO.0006590790-003, and durability. Always keep update 60+ lbs stabilitythe suction cup is coated with pu adhesive & uv glue different from hot melt glue, never falls, non-melting, no residue sticks firmly to the dashboard and windshield even over bumps, easy to remove, and the diameter is increased from 60mm to 69mm, this upgrade makes the suction cup up 40%+ and is UV resistant, reused after rinsing with water.
4 exclusive technologies -details to the extreme1️⃣with a larger contact surface of 2. 7 inches, the suction cup takes power to the extreme. This phone holder is compatible with most mobile phones and thinks cases, OPPO, Google Pixel, and Xiaomi Redmi, Motorola, OnePlus, etc.2️⃣industry original vent clip has 20x stability & durability; obtain EU patent No 006590790-0005.
Avolare - 5 - 2. 5 - 3. We will respond you in 24hrs to make sure you are satisfied. In addition, the reserved charging port at the bottom of the car phone holder allows you charging your phone without removing it from car phone holder. This remarkable technology is also used in air vent clip to protect the air vent of your car.
It can bring you the optimal view and security for driving, no matter when you are phoning, navigating, listening to music or charging. Adjustable with 360° rotationthe adjustable ball joint allows 360° swiveling and rotation is one of unique design of Avolare Air Vent Car Phone Holder. 5mm makes avolare car phone holder suitable for most vertical or horizontal vent louvers. If you have any questions or needs, please let us know. Furthermore, the ball head and screw nut are made by non-slip material which keep the car phone holder stable while you adjusting the angle of the phone holder.
Anti-scratch rubberthe 100% soft-touch surface of avolare car mount could cover interface between your phone and car phone holder to the great extent, which protect your phone from scratches and nicks. Ultra stable car phone holderwith the unique stable triangle structure design formed by two strong clamping arms and inverted trapezoid feet, Avolare Car Phone Holder will lock your phone or GPS devices firmly and prevent it from falling off or shaking even on rough roads. One-hand operation provides you a reassuring safe driving time. Moreover, the 2-level adjustable air vent clip design 1st level: 2.
Blukar - Super suction, dashboard, which can be stuck on the windshield, or other flat surfaces securely without worrying about falling or leaving marks. It doesn't block the view and can be easily adjusted with one hand to give you the best viewing angle without interfering with vision while driving. Thick case & big phones friendlythe car phone holder fits for smartphones without removing the caseeven the thick case.
Our universal car phone holder is compatible with all 4. 0-7 inch phones, motorola, google pixel, oneplus, huawei, such as iphone 14 pro max/ 14 Plus/ 14 pro/ 14/ 13 pro max/ 13 pro/ 13/ 13 mini/ 12, and Xiaomi Redmi, Galaxy, etc. Ensuring your device never slip out. Ideal festival gifts for family and friends. No complicated operations, bringing you a safer and better driving experience. Full protectionthe thick shockproof design perfectly protects your phone from scratches, The clip arms and support feet are equipped with super soft and super elastic silicone pads, while effectively solving common problems such as bumps and collisions.
Made of high quality heat-resistant materials abS+PC, Equipped with an upgraded extra strong suction cup base, Quality MaterialBlukar car phone holder will provide extremely strong suction power, it is durable and eco-friendly. You can navigate, answer calls and play music happily in your car. 360° flexible rotationthis car phone mount is equipped with a 360° rotatable ball joint, which helps you rotate the car mount horizontally and vertically. Simply press the clamping arms on both sides to lock the device.
Cinati - Stable & slip free : dependents on its soft silicone-textured bottom and sticky pads, scratching or flying out whenever there is an emergency braking, it can protect phone against bumping, sudden stop and sharp turn.
Just rinse with water and dry it, it will be the same as the new one. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, pixel, samsung galaxy note 8 /9/10 /10 pro/20 ultra, LG, Nexus, S 20 plus/ 8 plus / 9 plus /10 plus, HTC, IPAD, Mi, Sony, S20/S 8 /9 /10, Huawei, S 7 Edge, Garmin and so on. Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick.
Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
1. YOSH
2023 Upgrade 360° Rotation Car Phone Mount with Adjustable Ultra-Stable Clamp iPhone Car Holder for iPhone 15 14 13 12 11 Pro max X Samsung S23 S22 Huawei etc, YOSH Car Phone Holder Air Vent
Wide compatibility yosh air vent car phone mount is compatible with phones up to 6. 8 inches such as iphone 15 14 13 12 11 pro max x xr 8 7 plus samsung a71 a70 s20 s20+ s20 ultra note20 Ultra Note20 Huawei Mate40 pro+ Mate40 pro Mate40 P40 Pro P40 Pro+. Unimpeded charging the gap at the bottom of the holder allows you to connect the mobile phone to the charging line. It benefits from upgraded silicone pad on the vent clip, which effectively protect the car air vents better than others.
Without removing the mobile phone, you can feel free to charge the mobile phone. Just place your device in the holder and push two arms to clamp it tightly, and press the button in the back to release it to remove the phone. Easy installation & removement the rotating ball design offers 360°rotation and ensures that you can adjust the holder to get the best viewing angle. Yosh air vent mobile phone holder can prevent phones from falling off or shaking, speed bumps and bumpy roads.
| Brand | YOSH |
| Manufacturer | YOSH |
| Height | 3 |
| Length | 7 |
| Weight | 0.24 |
| Width | 5 |
| Part Number | CH202 |
| Model | CH202 |
| Warranty | Warranty & Support: YOSH provides an 18-Month Warranty for all of our products. |
2. yola pro
Car Phone Holder Car Holder Car Phone Mount,Dashboard Windscreen Car Phone Holder,Universal Car Cradles with One Button Release&Strong Sticky Gel Pad for iPhone14 13 12 11 8 7,Galaxys,P50 mate 50,etc
2023 upgraded industrial-strength suction cuppaired with industry-leading suction-cup technology, with a coating of sticky gel for seriously secure mounting on your windshield/dashboard. This cell phone holder for car attaches firmly to the vehicle windshield and stays mounted in hot or cold. This car phone holder is washable and reusable. Note:we do not recommend to apply the dashboard car phone mount on leather, wall or filmed glass surfaces as the suction cup. For better suction, any rough or curved surfaces will weaken the suction;②allow the car phone holder mount to sit on the surface for 24 hours after installation;③Don't expose this cell phone holder for car to direct sunlight for a long time, seller suggestions①always install the cell phone holder for car on a smooth/flat/clean surface, low temperatures under10 degrees also will affect the suction④Remove the dust film from the bottom of the bracket before installing the car phone holder mount.2
2023 upgraded multiple usages car phone holderthis car phone mount with washable and reusable suction cup, windshield mount or desk mount, can be mounted here and there as a dashboard mount, releasing your hand from holding the phone, caring for your driving safety and making your life more convenient. Silicone padded clamp: in order to better protect the mobile phone and avoid the direct friction between the mobile phone and the bracket, we use silica gel pad as the connection. Silicone padded clamp causes no scratching to your precious phone.
| Brand | yola pro |
| Manufacturer | yola pro |
| Height | 13 cm (5.12 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.21 kg (0.46 Pounds) |
| Width | 8.51 cm (3.35 Inches) |
| Model | 032-UK |
3. Pnitri
Pnitri Car Phone Holder, Air Vent Protective Car Phone Mount, Hook Clip & Legs Double Support Stable Universal Mobile Phone Mount Cradle Compatible with iPhone/Galaxy/Huawei4.0''-7.0''
The inner parts of the clamping arms is also equipped with silicone pads to avoid scratches. Suitable for vertical and horizontal air vents. Personalized angles: the phone mount offers a smooth 360° rotation, enabling you to effortlessly switch between horizontal and vertical modes. Multiple upgraded features: the contact surface of the phone mount is covered by soft grooved silicone, allowing for more air flow and Reduce the possibility of slipping the phone. Clamping arm adjustment width. Car owners with circular air vents are advised to carefully observe and make a decision accordingly.
It fits most cars, suvs, and taxis, trucks, a perfect assistant for Uber and Lyft drivers. Triple support: in addition to its high-intensity metal hook, Pnitri car mount for phone is equipped with 2 supporting legs and 2 Snap-in slots, it can be rotated to various angles, ensuring stability and making no noise while protecting your car accessories. Pc+abs material with excellent heat resistance makes it suitable in regions with temperatures from -20°C to 70°C.
| Brand | Pnitri |
| Manufacturer | Pnitri |
| Height | 6 cm (2.36 Inches) |
| Length | 12.2 cm (4.8 Inches) |
| Weight | 0.16 kg (0.35 Pounds) |
| Width | 8 cm (3.15 Inches) |
| Part Number | PNCP01 |
| Model | PNCP01 |
| Warranty | 90 Day Warranty Against Manufacturer Defects |
4. Arteck
Android Smartphone, 11, Arteck Car Mount, Universal Mobile Phone Car Mount Holder 360° Rotation for Auto Windshield and Dash, for Cell Phones Apple iPhone 15, 14, 14 Pro, SE, 12, GPS, 15 Pro, 13
Sturdy design: the sturdiness of this mount comes from its combination of premium quality rubber reinforced with extra strong durable plastic. Universal compatibility: the mount can be used with a variety of smartphones, x, 8, 12, 12 pro, 13, xr, 5, xs max, 14 pro, 8 plus, 14, Samsung S Series, including iPhone 15, 6, 11 pro max, 15 Pro, 11, 7, 13 mini, SE, 11 pro, 13 pro, xs, Note and all other smart phones and GPS navigations.
Multi mount locations: this multifunctional smartphone mount can be mounted on a variety of locations and surfaces because the sticky gel pad sticks securely to most surfaces, yet still easy to remove. The mount is generally lightweight and compact making it extremely handy and easily stored. The combination of these two materials gives this mount the much needed strength.
| Brand | Arteck |
| Manufacturer | ARTECK |
| Weight | 0.02 kg (0.04 Pounds) |
| Part Number | S056-Black |
| Model | S056-Black |
| Warranty | 2 Year Limited Warranty |
5. LISEN
LISEN Car Phone Holder 2023 Upgrade Air Vent Phone Holder for Cars Never Slip & Fall Super Stable Car Phone Mount Compatible with All Phones, Samsung S23/22, iPhone 15 Pro Max Plus 14 13 12 Series
So it's compatible with 99% Horizontal & Vertical vents. We continue to embed sustainability ever deeper in the way we do business – in our own operations and beyond, together with our suppliers. We aim at producing high quality and usefull phone mount for car for our customers, Lisen operates sustainably, creating wonderful using experience to everyone who likes our car phone holder mount.
Perfect for all horizontal & vertical vents: the 3rd generation build-in metal hook clip of this car phone mount is 50% longer than the ordinary one, and the support ring is rotatable, you can adjust the hook via the wheel knob to a suitable length and rotate the support ring to optimal angle to fit your Vent layout. We will always stand by your side. Sturdy hold all phones and thick case super wide adjustable arms design and the deepest 1. 09-inch clasp length enable phone holder for car air vent to fit for all 4. 0-7.
| Brand | LISEN |
| Manufacturer | LISEN |
| Height | 4.08 |
| Length | 4.44 |
| Weight | 0 kg (0.01 Pounds) |
| Width | 3.24 |
| Part Number | 2E769 |
| Warranty | 1 Year Warranty Against Manufacturer Defects |
6. UGREEN
Galaxy S22 S21 S20 FE, Gravity Phone Mount Cradle Reliable Stable Hands-Free, UGREEN Car Phone Holder Air Vent, Compatible with iPhone 15 Pro Max 14/13/12/11, Pixel 7/6Silver
Recommended to use with a thin phone case）. Simply put a phone into the holder, lock your phone automatically and grip it firmly, even on humps or bumpy roads. Just clip this car phone mount onto the air vent and slip your phone into its gravity clamp. The reserved charging port won't affect charging the phone while driving. One-handed operation: ugreen car phone cradle for air vent enables you to put down or pick up your phone simply with one hand.
Auto-clamp design: the gravity car vent phone mount features an auto-clamp gravity cradle to hold the phone in place. Universal compatibility: the mobile phone vent cradle fits 4. 7-7. 2 inches phones with a thin protective case, compatible with iphone 15 pro max/15 pro/15/15 plus/iphone 14 pro max/14 pro/14/13/13pro max/12 pro max / mi 11/10/Redmi Note 10 Pro / Pixel 6 Pro/5/4 / Huawei P50 Pro/P40/P30/P20 / Galaxy S23/S22/S21 Ultra/S21/S20 FE/S20+/S10 Lite/S10e / etc.
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Height | 2.76 |
| Length | 3.74 |
| Weight | 0.24 |
| Width | 3.43 |
| Part Number | 40907 |
| Model | 40907 |
7. VANMASS
VANMASS Car Phone Holder 2023,60+ LBS Strongest Suction & Military-GradeUltimate Mobile Phone Mount Cradle Stand for Cars Van,Patent & Safety CertsDash Window Vent for iPhone 15 14 Pro Max Samsung
Gzmr220601855501 rigorously-tested stability, and 20, security, 500, 500+ suction cup upgrade designs, we created this star work for 3 years, 000 miles of road tests, 000+ units with lots of amazing responses and obtained RoHS safety certification, EU patent NO.0006590790-003, and durability. Always keep update 60+ lbs stabilitythe suction cup is coated with pu adhesive & uv glue different from hot melt glue, never falls, non-melting, no residue sticks firmly to the dashboard and windshield even over bumps, easy to remove, and the diameter is increased from 60mm to 69mm, this upgrade makes the suction cup up 40%+ and is UV resistant, reused after rinsing with water.
4 exclusive technologies -details to the extreme1️⃣with a larger contact surface of 2. 7 inches, the suction cup takes power to the extreme. This phone holder is compatible with most mobile phones and thinks cases, OPPO, Google Pixel, and Xiaomi Redmi, Motorola, OnePlus, etc.2️⃣industry original vent clip has 20x stability & durability; obtain EU patent No 006590790-0005.
| Brand | VANMASS |
| Manufacturer | VANMASS |
| Height | 11.5 cm (4.53 Inches) |
| Length | 12.4 cm (4.88 Inches) |
| Weight | 0.71 |
| Width | 9.2 cm (3.62 Inches) |
| Part Number | NR-4XEW-11RY |
| Model | VMVK13CTBK1A-UK1 |
| Warranty | 3 years warranty |
8. Avolare
Air Vent Phone Holder for Car 360°Rotation Universal In Car Mount, Avolare Car Phone Holder, Super Stable & One Button Release Phone Mount Cradle Compatible with iPhone 14/13/12/11Plus Samsung Huawei
It can bring you the optimal view and security for driving, no matter when you are phoning, navigating, listening to music or charging. Adjustable with 360° rotationthe adjustable ball joint allows 360° swiveling and rotation is one of unique design of Avolare Air Vent Car Phone Holder. 5mm makes avolare car phone holder suitable for most vertical or horizontal vent louvers. If you have any questions or needs, please let us know. Furthermore, the ball head and screw nut are made by non-slip material which keep the car phone holder stable while you adjusting the angle of the phone holder.
Anti-scratch rubberthe 100% soft-touch surface of avolare car mount could cover interface between your phone and car phone holder to the great extent, which protect your phone from scratches and nicks. Ultra stable car phone holderwith the unique stable triangle structure design formed by two strong clamping arms and inverted trapezoid feet, Avolare Car Phone Holder will lock your phone or GPS devices firmly and prevent it from falling off or shaking even on rough roads. One-hand operation provides you a reassuring safe driving time. Moreover, the 2-level adjustable air vent clip design 1st level: 2.
| Brand | Avolare |
| Manufacturer | Avolare |
| Weight | 0.14 kg (0.31 Pounds) |
| Part Number | CAEMOUNT678 |
| Model | CAEMOUNT678 |
9. Blukar
Car Phone Holder, Blukar Adjustable Car Mount 360° Rotation for Dashboard/Windscreen 2023 Upgraded Strong Suction, One Button Release Cradle iPhone 4.0''-7.0'' Phones
Our universal car phone holder is compatible with all 4. 0-7 inch phones, motorola, google pixel, oneplus, huawei, such as iphone 14 pro max/ 14 Plus/ 14 pro/ 14/ 13 pro max/ 13 pro/ 13/ 13 mini/ 12, and Xiaomi Redmi, Galaxy, etc. Ensuring your device never slip out. Ideal festival gifts for family and friends. No complicated operations, bringing you a safer and better driving experience. Full protectionthe thick shockproof design perfectly protects your phone from scratches, The clip arms and support feet are equipped with super soft and super elastic silicone pads, while effectively solving common problems such as bumps and collisions.
Made of high quality heat-resistant materials abS+PC, Equipped with an upgraded extra strong suction cup base, Quality MaterialBlukar car phone holder will provide extremely strong suction power, it is durable and eco-friendly. You can navigate, answer calls and play music happily in your car. 360° flexible rotationthis car phone mount is equipped with a 360° rotatable ball joint, which helps you rotate the car mount horizontally and vertically. Simply press the clamping arms on both sides to lock the device.
| Brand | Blukar |
| Manufacturer | Blukar |
| Height | 5.04 |
| Length | 4.69 |
| Weight | 0.2 kg (0.45 Pounds) |
| Width | 2.56 |
| Part Number | K9788 |
| Model | K9788 |
10. Cinati
Android Smartphones, Black, Slip Free Desk Phone Stand Compatible with iPhone, Cinati Car Phone Holder Mount Silicone Pad Mat for Various Dashboards, Samsung, GPS Devices and More
Just rinse with water and dry it, it will be the same as the new one. Including iphone 11/11 pro/11 pro max/ xr/ xs/ xs max/ x/8/8 plus/7/7 plus/ 6s /6s plus/6/6 plus/5se/5s/5/4s, pixel, samsung galaxy note 8 /9/10 /10 pro/20 ultra, LG, Nexus, S 20 plus/ 8 plus / 9 plus /10 plus, HTC, IPAD, Mi, Sony, S20/S 8 /9 /10, Huawei, S 7 Edge, Garmin and so on. Widely compatibility : the dashboard cell phone holder is suitable for most kinds of cell phones or gps devices which are between 6-12mm thick.
Washable & reusable : the bottom of the car phone holder is made from high-tech adhesives. Use tips : peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean no dust before laying the holder on.
| Brand | Cinati |
| Manufacturer | Cinati |
| Height | 1.77 |
| Length | 4.72 |
| Weight | 0.19 kg (0.42 Pounds) |
| Width | 4.72 |
| Part Number | FHD-UK |
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
